Sticking compressor guage.

Has anyone had any problems with their compressor guage sticking or not moving? If so, simply remove the inner from the case which will expose the inside. You will see a bar that comes from the pump/hose that pushes the guage to its level. The bar is connected to a part of the guage that rotates and has a curved guide. If you move this manually, you will see that the guide rubs against the outer sleeve preventing it from moving. Simply use some long nose pliers to ease the two parts away from each other and the guage works fine.

- James Potts.

Would you like to have a Porsche related advert or link on this website
Please complete the contact form.
(No affiliation with, or approval of, Porsche AG, Porsche Cars GB or Porsche Club GB is intended or implied.)
There is no Intention to Infringe any Copyrights, Logos or Trademarks. All Copyrights, Logos and Trademarks remain the Property of the Rightful Owners.

Copyright © 2002-2021 All Rights Reserved. No part of this web site or related materials may be reproduced, stored in a retrieval system, transmitted, retransmitted, duplicated, copied, reposted or otherwise used in any form or by any means electronic, mechanical, photocopying, recording or otherwise without the express, prior, written approval of the owners of